fbpx

Assetti

Eventuri Audi Rs3 Carbon Fiber Headlamp Duct

Eventuri-rs3-headlamp-duct1.jpg
48944646881_d2be5ca44f_b.jpg
48944647591_1dda188473_b.jpg
48944648091_3209522709_b.jpg
48944841482_a2e5976b50_b.jpg
Eventuri-rs3-headlamp-duct3.jpg
Eventuri-rs3-headlamp-duct4.jpg
Eventuri-rs3-headlamp-duct5.jpg
Eventuri-rs3-headlamp-duct6.jpg
Eventuri-rs3-headlamp-duct7.jpg
Eventuri-rs3-headlamp-duct8.jpg
Eventuri-rs3-headlamp-duct2.jpg

Fitting Details

Installation available at our state of the art fitting centre based in Cheshire Oaks in the Northwest of England.

AUDI RS3 HEADLAMP DUCT

Introducing another World first – a purpose designed carbon headlamp duct for the Audi RS3 8V.
 

With the RS3 gaining popularity as a serious track car, we have developed an additional part for our intake to give you that extra edge. This headlamp duct replaces the OEM headlamp and seals against our RS3 intake for a true RAM-AIR configuration with a direct cold air feed to the filter. The duct follows the same lines as the stock headlamp and features two carbon air guides to channel airflow to the filter. It also has vents on the surface which is perpendicular to the oncoming flow to prevent drag. Tested on track at speeds over 190mph we have ensured that the advantage of the air feed outweighs any additional drag for a net gain in track times. Since this duct replaces the main intake duct inside the engine bay against the slam panel – this area now remains open as a source of cooling for the engine itself. With the car in motion, external air flows into the grill and through the stock openings over the engine for an extra cooling effect. The headlamp duct allows for the most direct cold air feed possible and significantly helps to reduce heat soak keeping track times consistent.

Product details
 

Part Numbers:
EVE-ST38V8S-CF-HDP : Audi RS3 Carbon Headlamp Race Ducts

The Eventuri RS3 Headlamp Duct system is manufactured from prepreg carbon fiber engineered to perform a specific purpose and fabricated to the highest of standards.

Here are the details for each component and the design ethos behind them:
Each headlamp duct system consists of:
Carbon Headlamp Duct
Carbon Connecting Duct
Laser Cut Stainless Steel Brackets

Connecting Duct
The connecting duct seals the headlamp duct to the face of the intake itself. The rubber seal around the connecting duct allows the intake to move with the engine while keeping the seal intact. This prevents hot air from the engine bay to be sucked in by the intake. Again, made with prepreg carbon, the connecting duct is both functional and adds a great aesthetic to the engine bay.

Coupled with the Eventuri intake system, this headlamp duct provides the ultimate setup for track use.

£788.40

Out of stock

ASSETTI PRODUCTS AND SERVICES

BENEFITS OF
PPF

XPEL CERTIFIED INSTALLER

No More stone chips

Say goodbye to stone chips with XPEL PPF. The film protects the paint with a sacrificial layer which is resistant to chips and damage from debris.

ULTIMATE PROTECTION

Peace of mind that your vehicle can handle whatever the road throws at it when protected with PPF, from stone chips to bird stains PPF can protect from it all.

EASY MAINTENANCE

Keep your vehicle cleaner for longer! PPF is easier to maintain than paint thanks to it's hydrophobic properties ensuring your vehicle looks better for longer.

SELF HEALING

No more swirl marks. PPF has a self healing top coat which is resistant to light scratches and swirls. Simply park the car in the sun and watch any swirl marks fade away.

CONTACT US

FIND US

Assetti Performance

Unit 6 Helix Business Park, New Bridge Road

Ellesmere Port, Cheshire

CH65 4LR

 

[email protected]  \\  Tel: 01244 629 533

CONTACT US

CONTACT US

CONTACT US

CONTACT US

CONTACT US

CONTACT US

CONTACT US